wide tolerance

wide tolerance

A tolerance greater than standard tolerance.
References in periodicals archive ?
Unlike legacy counting systems for this type of application, the counter does not jam, even on shaped tablets, uneven soft gels, hard capsules and dusty pills.The counters can handle a wide tolerance in product size because the system does not rely on mechanically sorting the product.
- Guarantee a wide tolerance for vibrations and shocks (MIL-STD-810F)
This defect, caused by the weld bead pulling on the pipe, was beyond even the wide tolerance of the Hydratight connector's seals.
Slight changes in the bulb height design or wide tolerance manufacturing capability will dramatically affect compression load deflection (CLD) and the compression set properties (figure 3).
The forward drop typically is 3.5 V for white LEDs, but has a fairly wide tolerance. The number of LEDs in a string depends on the application, but nearly always results in a total output voltage that is less than 375 VDC, which precludes using a boost converter.
With soft silicone gel binders, the materials are flexible enough to fill large gaps with wide tolerance ranges without overstressing components.
The HE-1400 and HE-1600 Series controllers, which are RollS compliant, feature wide tolerance power supplies (12 VDC [+ or -] 25%), locking connectors and low-mass tantalum capacitors for maximum tolerance to shock and vibration, Mil-spec silicon resin conformal coatings, laboratory-certified operating temperature ranges of -40[degrees]C to +80[degrees]C and calculated MTBF in excess of 150K hours (HE-1600) and 200K hours (HE-1400).
The unit incorporates automatic voltage regulation to provide a wide tolerance to power fluctuations, and assures protection against damaging power surges to telephone, fax, modern and Internet lines.
* Certain areas on the magnetic disk drive head are allowed to have a wide tolerance of surface roughness.
Hipulse E has power ratings between 120kVA and 4800kVA and offers wide tolerance to both input voltage (+/-15%) and input frequency (+/-5%).