wire lath

wire lath

[¦wīr ′lath]
(engineering)
A netting formed of welded wire, usually with a paper backing, and used as a base for plaster.

wire lath

Wire welded to form a netting, usually with a paper backing; used as a base for plaster.
References in periodicals archive ?
where gypsum board or plaster walls exist, remove gypsum board or plaster and wire lath from top of tub to ceiling on all sides of bathtub; replace with new 5/8 thick tile backer board.
Almost all stone veneer installations start with a layer or two of building paper, covered by properly installed dimpled and galvanized wire lath. The next step is to cover the lath with a 1/2-in.
Wire lath can be unruly, and the cut edges are sharp.
Including the wire lath, self-leveling underlayment, thin-set, grout and miscellaneous supplies, the total cost of materials for our 7 x 11-ft.
thick layer of mortar over wire lath that's nailed to the wall studs or subfloor.
Gross surface mounting: 200 m, Area Venus Rotte: about 1 640 m, surface wire lath tray 3 500 m, total area modeled in caves inside: about 5 200 m, surface waterproofing membrane Green roof approximately 2000 m.
Subject of the services to be carried out this assignment unit: In several rooms of the opera building (component A / BT-A) are suspended, smooth plastered ceiling wire lath to restore or reconstruct.
Pad-needled about 300 m2-200 m2 floor false ceiling panels with min approx 1100 m2 false ceiling metal panels 60 m2 L-shaped manhole covers (wire lath) 500 m-topping 50 m2 C Demolition and Dismantling of heating and plumbing equipment Dev.