wire size

wire size

In the US, a size, usually stated in terms of American Wire Gauge (AWG) and/or thousand circular mills (MCM) which applies to copper conductors.
Mentioned in ?
References in periodicals archive ?
One product grade is suitable for all wire size cross-sections (0.3 sq.
One grade is suitable for all wire size cross sections (0.3 to 10 mm2).
To make reels of copper electrical building wire and cable easier to handle and safer to ship--while improving inventory and stock keeping--they come labeled with large tape indicating the wire size for easier viewing from a distance.
The connectors are color coded according to wire size and come in red for #22 to #18, blue for #16 and #14, and yellow for #12 and #10.
"Our new double density connector range, that goes from a 5-pin variant in our Autosport Ultra connector right through to the 14-64, which helps incorporate the electronics and reduces the actual box size, means that we are helping to support the industry in the drive for smaller wire size. So our high density range, which now starts at wire size AWG24, is ideally positioned for the 26 to 30 AWG wire size which are now becoming the norm in the industry.
Standard features of the machine include four-axis linear scales and automatic threading of a wire size range from 0.002" to 0.012" in diameter with start holes from 0.007" diameter.
Talk to your dealer or the equipment manufacturer about the proper wire size and type.
For example, the inductance and wire size of a coil whose coil former has a form diameter equal to 0.2[inch] and a length of 0.4[inch] must be determined.
Features include embedded reduced harmonic technology to minimize wire size and the size of upstream overcurrent protection devices, a local/remote button for quick start up, and embedded communications.
Industry-standard color codes specify the wire size needed for the compression lug.
Various loops or hooks can be formed on the ends of the continuous springs using looping pliers, although as wire size increases different tools and a vice are required to hold the coil body so the last coil can be bent to suit fastening requirements.
Heater element computer designed for maximum wire size. Available in diam.